Dr Zakaria Quadir | Curtin University, Perth, Australia

Introduction

Post Nominals

PhD (Materials Science, Hong Kong), BSc Engg (Hons, Metallurgy, Bangladesh)

Employment History

2016- : Facility Leader, Microscopy and Microanalysis Facility (MMF), JdLC, Curtin Univeristy.

2007-2016: Material Research Manager, Electron Microscope Unit (EMU), UNSW Australia.

2009-2016: Lecturer, School of Materials Science and Engineering, UNSW Australia.

2006-2009: ARC CoE Research Fellow, ARC Centre of Excellence for Design in light Metal Research.

2004-2006: Research Fellow, Department of Mechanical Engineering, The University of Hong Kong.

2002-2004: Research Associate, Department of Mechanical Engineering, The University of Hong Kong.

Publications

2020

Torres, C., M. S. Hazarabedian, Z. Quadir, R. Johnsen, and M. Iannuzzi. 2020. "The Role of Tungsten on the Phase Transformation Kinetics and its Correlation with the Localized Corrosion Resistance of 25Cr Super Duplex Stainless Steels." JOURNAL OF THE ELECTROCHEMICAL SOCIETY 167 (8): 081510-081510.
Quadir, M. Z., G. Singh, W. D. A. Rickard, and A. S. M. A. Haseeb. 2020. "Substructural phenomena in Cu wire bond after laser assisted manufacturing in electronic packaging." Materials Letters 259

2019

Ameri, A. A. H., A. D. Brown, M. Ashraf, P. J. Hazell, M. Z. Quadir, and J. P. Escobedo-Diaz. 2019. "An Effective Pulse-Shaping Technique for Testing Stainless Steel Alloys in a Split-Hopkinson Pressure Bar." Journal of Dynamic Behavior of Materials 5 (1): 39-50.
Daly, L., M. R. Lee, L. J. Hallis, D. W. Saxey, D. Fougerouse, W. D. A. Rickard, N. E. Timms, F. Jourdan, S. M. Reddy, T. Salge, and 11 more contributors. 2019. "SOLAR WIND HYDRATION OF ITOKAWA OLIVINE." In 82nd Annual Meeting of the Meteoritical-Society (MetSoc), Jul 7, 2019, Sapporo, JAPAN: WILEY.
Nankivell, T. M., A. A. H. Ameri, J. P. Escobedo-Diaz, M. Z. Quadir, C. Logos, and S. S. Higgs. 2019. "Investigating the mechanical response under quasi-static compression of cold-rolled lean duplex stainless steel 2101." In Minerals, Metals and Materials Series, 153-160
Salasi, M., M. Iannuzzi, W. Rickard, and Z. Quadir. 2019. "Low stress abrasion-corrosion of high-Cr white cast iron: Combined effects of particle angularity and chloride ions." Journal of the Electrochemical Society 166 (13): C382-C393.

2018

Yao, X., Y. F. Zheng, M. Z. Quadir, C.Kong, J. M. Liang, Y. H. Chen, P.Munroe, and D. L. Zhang. 2018. "Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4 wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion." Journal of Alloys and Compounds 745: 519-524.
Wang, L., A. Rawal, M. Z. Quadir, and K. F. Aguey-Zinsou. 2018. "Formation of aluminium hydride (AlH3) via the decomposition of organoaluminium and hydrogen storage properties." International Journal of Hydrogen Energy 43 (34): 16749-16757.
Aylmore, M. G., K. Merigot, Z. Quadir, W. D. A. Rickard, N. J. Evans, B. J. McDonald, E. Catovic, and P. Spitalny. 2018. "Applications of advanced analytical and mass spectrometry techniques to the characterisation of micaceous lithium-bearing ores." Minerals Engineering 116: 182-195.
Ameri, A. A. H., J. P. Escobedo-Diaz, M. Z. Quadir, A. Brown, M. Ashraf, and P. Hazell. 2018. "The effect of loading direction on the dynamic damage in lean duplex stainless steel 2101."
Ameri, A. A. H., J. P. Escobedo-Diaz, M. Z. Quadir, M. Ashraf, and W. Hutchison. 2018. "Strain rate effect on the mechanical response of duplex stainless steel."
Brown, A. D., A. H. Ameri, A. Gregg, D. C. Austin, J. P. Escobedo, P. J. Hazell, D. East, and M. Z. Quadir. 2018. "Dynamic mechanical response of additive manufactured Ti-6Al-4V."
Lai, Q., M. Z. Quadir, and K. F. Aguey-Zinsou. 2018. "LiBH4 Electronic Destabilization with Nickel(II) Phthalocyanine - Leading to a Reversible Hydrogen Storage System." ACS Applied Energy Materials 1 (12): 6824-6832.
Lai, Q., A. Rawal, M. Z. Quadir, C. Cazorla, U. B. Demirci, and K. F. Aguey-Zinsou. 2018. "Nanosizing Ammonia Borane with Nickel: A Path toward the Direct Hydrogen Release and Uptake of B–N–H Systems." Advanced Sustainable Systems 2 (4)

2017

2016

2015

Duan, J. Q., M. Z. Quadir, and M. Ferry.. "An Analytical Framework for Predicting the Limit in Structural Refinement in Accumulative Roll Bonded Nickel." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 47A Inpress.
Najafzadeh, N., M. Z. Quadir, and P. Munroe. 2015. "Through Thickness Microstructural and Texture Inhomogeneity Within Al Layers in ARB-Produced Al-Al(Sc) Layered Composite Sheets." Metallurgical And Materials Transactions A: Physical Metallurgy And Materials Science 46 (10): 4772-4782.
Quadir, M. Z., K. D. Lau, N. Afrin, and M. Ferry. 2015. "Diffusion and precipitation phenomena across layer interfaces in a roll bonding composite of Al(Si) and Al(Cu)." Composite Interfaces 22 (1): 13-24.
Afrin, N., M. Z. Quadir, and M. Ferry. 2015. "Formation of Highly Misoriented Fragments at Hot Band Grain Boundaries During Cold Rolling of Interstitial-Free Steel." Metallurgical And Materials Transactions A: Physical Metallurgy And Materials Science 46 (7): 2956-2964.
Borrero-Lõpez, O., T. Vodenitcharova, M. Z. Quadir, and M. Hoffman. 2015. "Scratch Fracture of Polycrystalline Silicon Wafers." Journal Of The American Ceramic Society 98 (8): 2587-2594.

2014

Afrin, N., M. Z. Quadir, and M. Ferry. 2014. "On the complexities of microband interactions in a cold-deformed goss-oriented Ni single crystal." Metallurgical And Materials Transactions B: Process Metallurgy And Materials Processing Science 45 (2): 345-351.
Zinnia, N. A., M. Z. Quadir, P. R. Munroe, and M. Ferry. 2014. "Unusual crystallographic aspects of Microband boundaries within {111} oriented grains in a cold rolled interstitial free steel." ISIJ International 54 (6): 1346-1352.
Najafzadeh, N., M. Z. Quadir, and P. Munroe. 2014. "Through-thickness variations in recrystallization behavior in an Al-based ARB composite sheet."
Yusuf Valentino Kaneti, Julien Moriceau, Minsu Liu, Yuan Yuan, Quadir, Xuchuan Jiang, and Aibing Yu. 2014. "Hydrothermal synthesis of ternary α -Fe2O3–ZnO–Au nano composites with high gas-sensing performance." Sensors and Actuators B: Chemical: international journal devoted to research and development of physical and chemical transducers 209: 889-897.
Kaneti, Z. Quadir, Zhengjie Zhang, Chuyang Chen, Jeffrey Yue, Minsu Liu, Xuchuan Jiang, and Aibing Yu. 2014. "Solvothermal synthesis of ZnO-decorated α-Fe2O3 nanorods with highly enhanced gas-sensing performance toward η-butanol." Journal of Materials Chemistry A 2: 13283-13292.
Yusuf V. Kaneti, Zhengjie Zhang, Jeffrey Yue, Z. Quadir, Chuyang Chen, Xuchuan Jiang, and Aibing Yu. 2014. "Crystal plane-dependent gas-sensing properties of zinc oxide nanostructures: experimental and theoretical studies." Physical Chemistry Chemical Physics 16: 11471-11480.

2013

Guo, W., M. Z. Quadir, S. Moricca, T. Eddows, and M. Ferry. 2013. "Microstructural evolution and final properties of a cold-swaged multifunctional Ti-Nb-Ta-Zr-O alloy produced by a powder metallurgy route." Materials Science And Engineering A 575: 206-216.
Guo, W., M. Z. Quadir, and M. Ferry. 2013. "The mode of deformation in a cold-swaged multifunctional Ti-Nb-Ta-Zr-O alloy."
Quadir, M. Z., and P. R. Munroe. 2013. "Origin of copious recrystallization in cold rolled interstitial free (IF) steels." Steel Research International 84 (12): 1320-1324.
Tay, S. L., A. S. M. A. Haseeb, M. R. Johan, P. R. Munroe, and M. Z. Quadir. 2013. "Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn-3.8Ag-0.7Cu lead-free solder and copper substrate." Intermetallics 33: 8-15.
George, C., B. Soe, K. King, M. Z. Quadir, M. Ferry, and L. Bassman. 2013. "3D microband boundary alignments and transitions in a cold rolled commercial purity aluminum alloy." Materials Characterization 79: 15-21.

2012

Bommareddy, A., M. Z. Quadir, and M. Ferry. 2012. "Time and temperature regime of continuous grain coarsening in an ECAP-processed Al(0.1 wt.% Sc) alloy." Journal Of Alloys And Compounds 527: 145-151.
Ortiz, A. L., O. Borrero-López, M. Z. Quadir, and F. Guiberteau. 2012. "A route for the pressureless liquid-phase sintering of SiC with low additive content for improved sliding-wear resistance." Journal Of The European Ceramic Society 32 (4): 965-973.
Afrin, N., M. Z. Quadir, L. Bassman, J. H. Driver, A. Albou, and M. Ferry. 2012. "On the bumps and curves in the microband boundaries in a channel-die compressed Goss-oriented Ni single crystal."
Quadir, M. Z., M. Ferry, and P. R. Munroe. 2012. "Crystallography of the low angle lamellar band boundaries in ARB-processed aluminum sheet."
Afrin, N., M. Z. Quadir, W. Xu, and M. Ferry. 2012. "Spatial orientations and structural irregularities associated with the formation of microbands in a cold deformed Goss oriented Ni single crystal." Acta Materialia 60 (18): 6288-6300.

2011

McKenzie, W. R., M. Z. Quadir, M. H. Gass, and P. R. Munroe. 2011. "Focused Ion beam implantation of diamond." Diamond And Related Materials 20 (8): 1125-1128.
Duggan, B. J., Y. Y. Tse, G. Lam, and M. Z. Quadir. 2011. "Deformation and recrystallization of interstitial free (IF) steel." Materials And Manufacturing Processes 26 (1): 51-57.
Dayal, P., M. Z. Quadir, C. Kong, N. Savvides, and M. Hoffman. 2011. "Transition from dislocation controlled plasticity to grain boundary mediated shear in nanolayered aluminum/palladium thin films." Thin Solid Films 519 (10): 3213-3220.
Quadir, M. Z., O. Al-Buhamad, and M. Ferry. 2011. "The mechanical performance of ARB fabricated hybrid lamellar composite of recovered/recrystallized Al and precipitation hardened Al(Sc) layers."
Quadir, M. Z., M. Ferry, and P. R. Munroe. 2011. "The initial stages of formation of low angle boundaries within lamellar bands during accumulative roll bonding of aluminum." Scripta Materialia 64 (12): 1106-1109.
Afrin, N., M. Z. Quadir, L. Bassman, J. H. Driver, A. Albou, and M. Ferry. 2011. "The three-dimensional nature of microbands in a channel die compressed Goss-oriented Ni single crystal." Scripta Materialia 64 (3): 221-224.

2010

Quadir, M. Z., C. S. T. Chang, and B. J. Duggan. 2010. "Formation of the goss texture in a thin foil experiment on Fe-3.2%Si." ISIJ International 50 (2): 264-271.

2009

Quadir, M. Z., M. Ferry, O. Al-Buhamad, and P. R. Munroe. 2009. "Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding." Acta Materialia 57 (1): 29-40.
Xu, W., M. Z. Quadir, and M. Ferry. 2009. "A high-resolution three-dimensional electron backscatter diffraction study of the nucleation of recrystallization in cold-rolled extra-low-carbon steel." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 40 (7): 1547-1556.
Quadir, M. Z., O. Al-Buhamad, K. D. Lau, R. Quarfoth, L. Bassman, P. R. Munroe, and M. Ferry. 2009. "The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets."
Lau, K. D., M. Z. Quadir, and M. Ferry. 2009. "Shearing behaviour and texture evolution in aluminium sheet deformed by accumulative roll bonding."
Al-Buhamad, O., M. Z. Quadir, and M. Ferry. 2009. "Mechanical properties of an accumulative roll bonded aluminium alloy composite."
King, K., B. Liu, M. Z. Quadir, M. Ferry, and L. Bassman. 2009. "Novel method for identifying low-angle sub-grain boundaries."
Quarfoth, R., M. Z. Quadir, M. Ferry, and L. Bassman. 2009. "Finite element model of compression of a polycrystalline layer showing banding behavior."

2008

Al-Buhamad, O., M. Z. Quadir, and M. Ferry. 2008. "Some aspects on grain growth in ECAP deformed and heat treated aluminium 1.2%hafnium alloy."
Quadir, M. Z., A. Wolz, M. Hoffman, and M. Ferry. 2008. "Influence of processing parameters on the bond toughness of roll-bonded aluminium strip." Scripta Materialia 58 (11): 959-962.
Quadir, M. Z., O. Al-Buhamad, L. Bassman, and M. Ferry. 2008. "Texture randomization by intense shearing in layered Al and Al (0.3%Sc) ARB-processed sheet."

2007

Quadir, M. Z., O. Al-Buhamad, and M. Ferry. 2007. "Processing of multi-layered Al-Al(Sc) hybrid sheet by accumulative roll bonding."
Quadir, M. Z., O. Al-Buhamad, L. Bassman, and M. Ferry. 2007. "Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding." Acta Materialia 55 (16): 5438-5448.
Quadir, M. Z., N. Mateescu, L. Bassman, W. Xu, and M. Ferry. 2007. "Three-dimensional morphology of microbands in a cold-rolled steel." Scripta Materialia 57 (11): 977-980.
Duggan, B. J., M. Z. Quadir, Y. Y. Tse, K. Shen, G. L. Liu, and Q. Z. Chen. 2007. "The development of homo and heterogeneous rolling microstructures in rolled low carbon and interstitial-free steel."
Quadir, M. Z., L. Bassman, O. Al-Buhamad, and M. Ferry. 2007. "Formation of a recrystallized and recovered multilayered microstructure in a hybrid aluminium alloy."
Duggan, B. J., M. Z. Quadir, and R. Penelle. 2007. "An examination of cluster nucleation of goss oriented grains formed during secondary recrystallisation in an Fe-3.2% Si electrical steel."

2006

Quadir, M. Z., and B. J. Duggan. 2006. "A microstructural study of the origins of γ recrystallization textures in 75% warm rolled IF steel." Acta Materialia 54 (16): 4337-4350.
Chen, Q. Z., M. Z. Quadir, and B. J. Duggan. 2006. "Shear band formation in IF steel during cold rolling at medium reduction levels." Philosophical Magazine 86 (23): 3633-3646.
Quadir, Z., and B. J. Duggan. 2006. "Shear Band Thickening during Rolling of Interstitial Free Steel." ISIJ International 46 (10): 1495-1499.

2005

Quadir, M. Z., and B. J. Duggan. 2005. "Recrystallization texture and microstructure formation in heavily rolled if steel."
Duggan, B. J., M. Z. Quadir, Q. Z. Chen, K. Shen, and Y. Y. Tse. 2005. "Origin of the deformation microstructure in if steel after medium cold rolling reductions."
Duggan, B. J., Z. Quadir, and Y. Y. Tse. 2005. "Deformation Bands in Texture formation in Cold and Warm Rolling Interstitial Free Steel." In Advanced X-ray Techniques in Research and Industry Singh, A. K., 66-81: IOS Press.

2004

Quadir, M. Z., Y. Y. Tse, K. T. Lam, and B. J. Duggan. 2004. "Rolling and recrystallization texture of cold rolled if steel: A study from low to high deformation."
Quadir, M. Z., K. T. Lam, and B. J. Duggan. 2004. "A rolling-annealing cycle for enhanced deep drawing properties in interstitial free steels." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218 (6): 631-640.
Quadir, M. Z., and B. J. Duggan. 2004. "Deformation banding and recrystallization of α fibre components in heavily rolled IF steel." Acta Materialia 52 (13): 4011-4021.

2003

Duggan, B. J., K. T. Lam, and M. Z. Quadir. 2003. "Increasing desirable recrystallization texture in IF steel by controlled rolling."
Quadir, M. Z., and B. J. Duggan. 2003. "Shear band formation in warm rolled IF steel."

2002

Duggan, B. J., Y. Y. Tse, H. Ning, and M. Z. Quadir. 2002. "Mechanisms of recrystallization in cold and warm rolled low carbon steel and IF steel."
Tung, L. K., M. Z. Quadir, and B. J. Duggan. 2002. "A novel rolling-annealing cycle for enhanced deep drawing properties in IF steels."
Quadir, M. Z., and B. J. Duggan. 2002. "A comparative investigation of warm rolled IF steel and low carbon steel."